$39.00
or 4 payments of $9.75 with Wizit learn more
Designed to suit 4×4 synthetic rope, the Alloy hawse fairlead helps direct winch rope onto the winch from the bullbar whilst avoiding any sharp edge it might otherwise face.
Designed to suit 4×4 synthetic rope, the Alloy hawse fairlead helps direct winch rope onto the winch from the bullbar whilst avoiding any sharp edge it might otherwise face.
| Brand | True Adventure Outdoor |
|---|
An essential item for any off-road enthusiast is a good quality Hulk Series tree trunk protector. The Hulk Tree Trunk Protector has an approximate safe working load of 12000kg which makes it suitable for all 4wds and off-road vehicles. Unlike a snatch strap or recovery strap, a tree trunk protector is designed with a 75mm x 3mm polyester webbed strap to even the weight load to prevent damage to trees when winching.
Add to cart
This Bow Shackle 4.75T complies to AS2741-2002 is made from cast iron steel, has a working load limit of 4750kg, and is 19mm by 22mm. If you need a shackle that can withstand loads from multiple directions, Bow shackles, also called anchor shackles, have a large O-shaped loop and can handle adjusting loads. This durable bow shackle has been tested to AS2741-2002 standards.
Add to cart
Premium roller fairlead from True Adventure Outdoor Recovery Products is designed to reduce friction so the Metal cable is protected from wear that can cut short its service life. ( NOTE: This is not recommended for Dyneema ropes only steel ropes. For Dyneema ropes use our Hawse Fairlead ) Its design allows it to be used with most winch brands and bull bars, and its ultra-high tensile strength steel with epoxy grade finish means that it’s less likely to chip than powder-coated models. Zinc galvanisation and chrome protect it from exposure to the elements, and the heavy duty bolts and lock nuts securely hold the rollers in place. The dowel-pin bearings and composite bushings on multi-directional rollers allow smooth operation even when pulling at extreme angles. This roller fairlead is designed to be used with All type of steel rope winches.
Read more
This is a great mounting plate if you want a winch fitted to the rear of you 4wd. Simply remove the Tow Ball mount and push True Adventure winch Receiver Mount. Quick easy Release Winch Mount, For Use With most Winches, Works with all True Adventure Outdoor Winches, Will Also Accommodate Most Major Brand Winches, No Drilling Required, Powder Coated finish, Black colour, Made from mild steel. Mild Steel, Slides Directly To Vehicle Tow bar, Accommodates Most Major Brand Winches, Pre Drilled For Quick Mounting of Bull Bar/Light Bar And/Or Roller Fairlead, Bolt-On Mounting
videocam Watch Video Read more
All 12 Volt
Ph: 1300 881 489
Unit 1 / 49 Central Hills Drive, Gregory Hills NSW 2557
© 2025 All 12 Volt Australia
